|
|
Desing of the carbon cap for the bike's fork
Gallo, Dominik ; Čípek, Pavel (referee) ; Košťál, David (advisor)
This bachelor's thesis discusses problems and solutions of design of the carbon crown for the bike's fork. It shows an overview of the possible implementation of the initial design up to final part. The output will be the crown made of carbon composite by mould pressing. For manufacturing the prototype form will be used 3D printing – Fused Deposition Modeling.
|
|
|
Technology of manufacturing of carbon fibre composites by hot forming
Přikryl, Pavel ; Slaný, Martin (referee) ; Zouhar, Jan (advisor)
This master’s thesis deals with the composite materials and especially aims on the carbon and glass fiber composites. It points out different composition types and manufacturing methods which reflect in the different mechanical properties, final quality of the manufactured part and also in the manufacturing time. The practical part includes two particular manufacturing methods using prepregs, one cured in an autoclave and one by hot compression moulding.
|
|
|
Desing of the carbon cap for the bike's fork
Gallo, Dominik ; Skřivánková, Vendula (referee) ; Košťál, David (advisor)
This bachelor's thesis discusses problems and solutions of design of the carbon crown for the bike's fork. It shows an overview of the possible implementation of the initial design up to final part. The output will be the crown made of carbon composite by mould pressing. For manufacturing the prototype form will be used 3D printing – Fused Deposition Modeling.
|
|
|
New trends and material usage in bicycle frame design
Jelínek, Vladimír ; Němec, Karel (referee) ; Juliš, Martin (advisor)
Thesis in its first part summarizes the evolution of the bicycle from the draisine to the low wheels with a focus on the material of the frame of the bicycle. Also discussed in this section is an overview of small structural modifications, which were gradually used on a bike, like Bowden brake or the first type of transmission system. In the second part, the thesis describes the operating principles and types of suspension forks and disc brakes. Mentioned are materials that are currently used for bike frames with a focus on the advantages and disadvantages of each material used and its future anticipated use.
|
|
|
Application of composite materials for sport optics
Kupčák, Radim ; Slaný, Martin (referee) ; Zouhar, Jan (advisor)
In Its first half this master's thesis describes composite materials with carbon fiber reinforced plastics being the main focus point. An overview of production technologies follows. The major objective of the second part of this master's thesis is to design and manufacture a simplified model of an optical device using prepregs.
|
|
| |
|
|
The Visual Style of Canoe Races in Týn nad Vltavou
Šafářová, Gabriela ; Marešová, Věra (referee) ; Macháček, Mikuláš (advisor)
I focused on design of information and promotional materials of Canoe Marathon World in Tyn nad Vltavou. I concentrated mainly on the failures of the current visual style and proposed new solutions. The key is to design a new logo and its modifications, which will be put to use in a slight variation in the coming years. Art themes based on specific objects, materials and phenomena (lamina structure, paddles, movement) are simplified into almost abstract forms.
|
|
|
Precise bonding of composite materials
Tellinger, Adam ; Gregor, Lukáš (referee) ; Kupčák, Radim (advisor)
This bachelor's thesis deals with the issue of bonding composite materials. The first part of the bachelor's thesis is focused on research into the production of composite materials and gluing technologies. The content of the practical part is the design of test specimens and a preparation for their bonding with subsequent production. Furthermore, verification of compliance with the required accuracy of bonded joints when using different adhesives using 3D measurements.
|
|
|
Desing of the carbon cap for the bike's fork
Gallo, Dominik ; Skřivánková, Vendula (referee) ; Košťál, David (advisor)
This bachelor's thesis discusses problems and solutions of design of the carbon crown for the bike's fork. It shows an overview of the possible implementation of the initial design up to final part. The output will be the crown made of carbon composite by mould pressing. For manufacturing the prototype form will be used 3D printing – Fused Deposition Modeling.
|
|
|
Materials for the construction of frames of gravity bicycles
Hrubý, Erik ; Ročňáková, Ivana (referee) ; Juliš, Martin (advisor)
The presented bachelor thesis in it first part is focuses to the application of special racing bikes. The less known gravity disciplines with an explanation of their nature, the type of track and rules are presented. The second part of thesis deals with the structural design and fitting of mountain bikes used in each presented gravity disciplines. In the last part of thesis is a list of structural materials from which are manufactured special bike frames focusing on their mechanical properties, advantages and disadvantages and other usage.
|
guest ::
